Time And Date; Display Mode - Thermo Scientific Microm HM355S Operation Manual

Operating Instructions
Display and Key Functions

Time and Date

Display Mode

36 Operation Manual HM335S
With this part of the menu, the time and date can be set on the instru-
ment.
Press the MENU button [1]
Select "Time and date" by turning the knob [A] and confirm it by pres-
sing.
Note!
The time can be shown constantly in the normal display mode by turning
the scroll button [2].
The display mode can be selected in this position. It is possible to
choose between a NORMAL and a LARGE display mode.
• Press the MENU button [1]
• Select the display mode by turning the knob [A] and confirm it by
pressing it.
The normal display mode shows the selected fine and trim section
thickness with additional status indications at the same time.
Thermo Fisher Scientific