Initial Start-Up - Thermo Scientific Microm HM355S Operation Manual

Operating Instructions

Initial Start-up

Initial Start-up
20 Operation Manual HM335S
Note!
A safe function of the Microtome is only ensured, if the equipment possesses
a temperature within the specified operating conditions (see technical data
sheet, page 14).We highly recommend that the Microtome rests at least 2
hours after unpacking at ambient temperature before switching it on for the
first time.
Note!
Before starting section, instrument, knife carrier and section waste tray
should be treated with the included or any other commercially available
paraffin repellent. This medium considerably reduces the adhesive property
of paraffin sections to the individual parts (see page 13 and 15, standard
and optional accessories)
Note!
The type of examination materials used and all special conditions for their
processing, pre-treatment and, if necessary, storage as well as instrument
controls for correct and safe operation are the responsibility of the operator.
The operator is also responsible for special equipment and materials and/or
reagents used for the operation of the instrument.
The operating panel, which is packed separately, can be attached to the
instrument or used freestanding. First connect the operating panel with
the instrument:
[a]
[b]
[c]
a For Service Purposes only
b Operating Panel
c Foot Pedal
d Cover For Fuses
e Power Switch
f Power Socket
[d]
[e]
[f]
Thermo Fisher Scientific