Table of Contents
Advertisement
Operating Instructions
Display and Key Functions
Cutting Process
Indication
Section Counter
26
Operation Manual HM335S
In the middle line of the display information about the sectioning status
can be seen.
•
Press the "scroll button" [2], to show a list of the functions on the
display.
The following information on the current sectioning position of the
instrument can alternatively be seen in the middle line of the display:
– number of sections
– sum of section thicknesses
– remaining travel to the front end position
•
To do so, press button [2] until the required information is shown
on the display.
If no information is required in this line, press button [2] until this line
of the display is blank.
The middle line of the display shows information on the sectioning
status.
The section counter adds up the number of sections produced. After
each downward movement of the specimen holder, the number on the
section counter increases by 1.
The counter can be reset to zero by pushing the "reset button" [3].
Section Counter
Thermo Fisher Scientific
Hide quick links:
Advertisement
Table of Contents
