Operating Instructions
Display and Key Functions
Mode Selection via
Interval Stroke
Single Stroke
34
Operation Manual HM335S
•
Press the menu button [1]
Knob [a]
•
Select "Mode" in the menu by pressing the knob [A]
•
In the submenu "Mode" select between the four operating modes
with the knob [A].
The selected operating mode is shown in the display on the operating panel.
•
Press the MENU button [1]
•
In the submenu "Mode" select the function "Interval"
Now a gradual approach between the specimen and the cutting edge is
possible. The cutting drive remains activated as long as either button
START/STOP [7] or knob [C] or the foot pedal (optional) is constantly
pressed.
•
Press the MENU button [1]
•
In the submenu "Mode" select the function "Single"
•
Unlock the lever for the mechanical brake.
•
Press twice the START/STOP button [7] or knob [C] or step on
the foot pedal (optional), to release a single cutting cycle.
Thermo Fisher Scientific