Thermo Scientific Microm HM355S Operation Manual page 4

Preface
© 2011 Thermo Fisher Scientific. All rights reserved.
Thermo Fisher Scientific Microm International GmbH is an ISO 9001 Company.
Thermo Scientific is the trading name of Thermo Fisher Scientific Microm International GmbH.
All other trademarks are the property of Thermo Fisher Scientific and its subsidiaries. Thermo Fisher
Scientific makes every attempt to ensure that the information contained in this support documentation is
correct and clearly stated but does not accept responsibility for any errors or omissions. The development of
Thermo Scientific products and services is an ongoing process. Please ensure that any published information
you use as a reference is up to date and relates to the condition of the product. If necessary, check with Thermo
Fisher Scientific or your local Thermo Fisher Scientific representative.
This Operation Manual may not, in whole or in part, be copied, photocopied, reproduced, translated or con-
verted to any electronic or other form without prior written consent of Thermo Fisher Scientific.
All information contained in this manual is proprietary and confidential, and the exclusive property of Thermo
Fisher Scientific. This manual is protected by copyright and any reproduction is prohibited. It is only be used
by the individuals to whom it has been made available through Thermo Fisher Scientific.
Contact addresses Anatomical Pathology
Microm International GmbH
part of Thermo Fisher Scientific
Otto-Hahn-Strasse 1a
69190 Walldorf
Germany
Tel: +49 (0) 6227 836-0
Fax: +49 (0) 6227 836-111
www.ap-walldorf.com
info.dxd.dewal@thermofisher.com
4481 Campus Drive
Kalamazoo
MI 49008, USA
Tel: 1-800-522-7270
Fax: +1 269-372-2674
www.thermo.com/pathology
The Thermo Scientific Microm HM355S meets the following CE Mark requirements:
In Vitro Diagnostic Directive 98/79/EC
11/11
04 Operation Manual HM335S Thermo Fisher Scientific