Other Programming Selections - Honeywell Solaris 7980g User Manual

Step 6.
Step 7.

Other Programming Selections

•
•
•
•
Solaris 7980g User Guide
Editor Commands
Refer to Data Format Editor Commands
represent the command you want to enter.
Scan Save to save your data format, or Discard to exit without saving your
changes.
Enter Data Format
Discard
Clear One Data Format
This deletes one data format for one symbology. If you are clearing the primary
format, scan 0 from the
format, scan 1, 2, or 3, depending on the format you are clearing. Scan the
Terminal Type and Code I.D. (see
code data length for the specific data format that you want to delete. All other
formats remain unaffected.
Clear all Data Formats
This clears all data formats.
Save to exit and save your data format changes.
Discard to exit without saving any data format changes.
Clear One Data Format
Save
Programming Chart. If you are clearing an alternate
Symbology Charts
(page 74). Scan the symbols that
on page 221), and the bar
Clear All Data Formats
Discard
Save
73