Table of Contents
Advertisement
Top of Centering Window
Output Sequence Overview
Output Sequence Editor
This programming selection allows you to program the scan engine to output data (when scanning more than one symbol)
in whatever order your application requires, regardless of the order in which the bar codes are scanned. Reading the
Default Sequence symbol programs the scan engine to the Universal values, shown below. These are the defaults. Be
certain you want to delete or clear all formats before you read the Default Sequence symbol.
Note: To make Output Sequence Editor selections, you'll need to know the code I.D., code length, and character match(es)
your application requires. Use the Alphanumeric symbols (inside back cover) to read these options. You must hold
the trigger while reading each bar code in the sequence.
To Add an Output Sequence
1. Scan the Enter Sequence symbol (see
2. Code I.D.
On the
Symbology Charts
Locate the Hex value for that symbology and scan the 2 digit hex value from the Programming Chart (inside back
cover).
3. Length
Specify what length (up to 9999 characters) of data output will be acceptable for this symbology. Scan the four digit data
length from the Programming Chart. (Note: 50 characters is entered as 0050. 9999 is a universal number, indicating all
lengths.) When calculating the length, you must count any programmed prefixes, suffixes, or formatted characters as
part of the length (unless using 9999).
4. Character Match Sequences
On the
ASCII Conversion Chart (Code Page
want to match. Use the Programming Chart to read the alphanumeric combination that represents the ASCII characters.
(99 is the Universal number, indicating all characters.)
5. End Output Sequence Editor
Scan F F to enter an Output Sequence for an additional symbology, or Save to save your entries.
Other Programming Selections
• Discard
This exits without saving any Output Sequence changes.
3 - 16
Require Output
on page A-1, find the symbology to which you want to apply the output sequence format.
1252), page A-3, find the Hex value that represents the character(s) you
Sequence, page 3-18).
Bottom of Centering Window
Advertisement
Table of Contents
