Connect With Keyboard Wedge - Honeywell Solaris 7980g User Manual

1. Remove the back cover and feed the interface cable through to the device.
2. Slide the back cover on and screw the back cover to the device, and then
3. The scanner beeps.
4. Verify the scanner operation by scanning a bar code from the
The unit defaults to a USB PC Keyboard. Refer to
settings.
For additional USB programming and technical information, refer to "USB Applica-
tion Note," available at the Knowledge Base

Connect with Keyboard Wedge

The scanner can be connected between the keyboard and PC as a "keyboard
wedge," where the scanner provides data output that is similar to keyboard entries.
The following is an example of a keyboard wedge connection:
2
connect the interface cable to the computer.
USB Connection:
on page 233.
3
1
1
2
www.hsm.force.com/publickb.
2
3
Sample Symbols
page 16 for other USB terminal
Solaris 7980g User Guide