Connect With Rs485 - Honeywell Solaris 7980g User Manual

Area-imaging vertical slot scanner
Hide thumbs Also See for Solaris 7980g:
Table of Contents

Advertisement

4. Slide the back cover on and screw the back cover to the device. Connect the
5. Once the scanner has been fully connected, power up the computer.
This interface programs 115,200 baud, 8 data bits, no parity, and 1 stop bit.

Connect with RS485

The scanner can be connected for an IBM POS terminal interface.
6
interface cable to the computer and tighten the two screws to secure the
connector to the port. Plug the power supply into the outlet.
RS232 Serial Port Connection:
1
2
3
4
Solaris 7980g User Guide

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents