Inspecting Cords And Connectors; Replacing Cables; Replacing The Interface Cable - Honeywell Solaris 7980g User Manual

•
•
•
•
•
•
•
•

Inspecting Cords and Connectors

Inspect the interface cable and connector for wear or other signs of damage. A
badly worn cable or damaged connector may interfere with scanner operation.
Contact your distributor for information about cable replacement. Cable replace-
ment instructions are on

Replacing Cables

The standard interface cable is attached to the scanner with an 10-pin modular
connector. When properly seated, the connector is held in the scanner by a flexible
retention tab. The interface cable is designed to be field replaceable.
•
•

Replacing the Interface Cable

1. Turn off the host system power.
2. Disconnect the scanner's cable from the terminal or computer.
3. Remove the scanner's back cover.
216
®
Super Sani-Cloth wipes
Isopropyl Alcohol wipes (70%)
™
CaviWipes
®
Virex 256
®
409 Glass and Surface Cleaner
®
Windex Blue
®
Clorox Bleach – 10%
Gentle dish soap and water
Order replacement cables from Honeywell or from an authorized distributor.
When ordering a replacement cable, specify the cable part number of the
original interface cable.
page 216.
Solaris 7980g User Guide