CHAPTER
INPUT/OUTPUT SETTINGS
3
Power Up Beeper
The scanner can be programmed to beep when it's powered up. Scan the Off bar
code(s) if you don't want a power up beep. Default = Power Up Beeper On.
Power Up Beeper Off
Beep on BEL Character
You may wish to force the scanner to beep upon a command sent from the host. If
you scan the Beep on BEL On bar code below, the scanner will beep every time a
BEL character is received from the host. Default = Beep on BEL Off.
Solaris 7980g User Guide
*Beep on BEL Off
* Power Up Beeper On
Beep on BEL On
37