Presentation Sleep Mode - Honeywell Solaris 7980g User Manual

Presentation Sleep Mode

When Presentation Sleep Mode On is selected, the scanner goes into sleep mode
(illumination is off and the LED will slowly blink on and off) after the time interval
set using
scanner will wake when an object is presented to the window or the pitch or volume
button is pressed. Default = Presentation Sleep Mode On.
Note: In some conditions the scanner will switch between
Presentation Sleep Mode
wake up in very dark conditions.
Note: This selection is unavailable when the
Presentation Mode
Presentation Sleep Mode Timeout
Use this selection to set a timeout (in seconds) for the scanner when using
Presentation Sleep
will enter the Presentation Sleep Mode timeout selected. After scanning the Pre-
sentation Sleep Mode Timeout bar code, set the timeout duration (from 0-
3600000) by scanning digits on the
Default = 300000 (300s).
Solaris 7980g User Guide
Presentation Sleep Mode
according to ambient light level. This allows the scanner to
are set to off.
* On
Mode. When this time has elapses with no activity, the scanner
Timeout, during which there is not activity. The
Presentation Idle Mode
Illumination Lights
Programming Chart, then scanning Save.
Presentation Sleep Mode
Timeout
and
or LED Illumination -
Off
43