Keyboard Conversion - Honeywell Solaris 7980g User Manual

Automatic Caps Lock is used if you change the Caps Lock key on and off. The
software tracks and reflects if you have Caps Lock on or off . This selection can only
be used with systems that have an LED that notes the Caps Lock status (AT key-
boards).
Autocaps via NumLock bar code should be scanned in countries (e.g., Germany,
France) where the Caps Lock key cannot be used to toggle Caps Lock. The Num-
Lock option works similarly to the regular Autocaps, but uses the NumLock key to
retrieve the current state of the Caps Lock.
Emulate External Keyboard should be scanned if you do not have an external key-
board (IBM AT or equivalent).
Note: After scanning the Emulate External Keyboard bar code, you must power cycle your
computer.

Keyboard Conversion

Alphabetic keyboard characters can be forced to be all upper case or all lowercase.
So if you have the following bar code: "abc569GK," you can make the output
"ABC569GK" by scanning Convert All Characters to Upper Case, or to "abc569gk"
by scanning Convert All Characters to Lower Case.
These settings override
Note: If your interface is a keyboard wedge, first scan the menu code for
Lock
Default = Keyboard Conversion Off.
28
Autocaps via NumLock
(page 28). Otherwise, your output may not be as expected.
* Keyboard Conversion Off
Keyboard Style selections.
Automatic Caps Lock
Emulate External Keyboard
Automatic Caps
Solaris 7980g User Guide