Default = Interlocked.
EAS Interlocked Duration Timeout
When using the Interlocked EAS Mode of Operation, you must set the lag time
between when a bar code is read and when the EAS tag is deactivated. Use this
selection to set this timeout (in milliseconds). After scanning the EAS Interlocked
Duration Timeout bar code, set the timeout duration (from 1-5000 milliseconds)
by scanning digits on the
Save. Default = 100 ms, which is 0.1 second.
154
* Interlocked
Programming Chart
inside the back cover, then scanning
EAS Interlocked Duration
Timeout
Continuous on Enable
Solaris 7980g User Guide