Checklist Before Installation - HP A6616 Installation Manual

Installation Tools, Meters and Devices
Installation accessories supplied with the router
Power cables

Console cable

PGND cable

Mounting brackets

Cable management bracket

Blank panel

ESD-preventive wrist strap

User supplied tools
Phillips screwdrivers: P1-100 mm, P2-150 mm, and P3-250 mm

Flat-blade screwdriver: P4-75 mm

Screws with various specifications

Various meters and devices, such as hub, configuration terminal, optional modules,

or multimeter.
Optional cables

Reference
When installing or maintaining the router, you can refer to the following documents shipped
with the router:
HP A6616 Router Installation Manual

HP SR6600 Routers Electronic Documentation

Or, you can obtain the latest documents from the documentation center on the website at
http://www.HP.com.

Checklist Before Installation

Table 3-4 Checklist before installation
Installation
site
Item

Ventilation

Temperature 0°C to 45°C (32°F to 113°F)
Relative humidity 10% to 95% (noncondensing)
Dust concentration ≤ 3 × 10
Cleanness




ESD prevention


Requirements
There is a minimum clearance of 10 cm (3.9 in.) around the inlet
vents and exhaust vents for heat dissipation of the router chassis.
A ventilation system is available at the installation site.
4
The equipment and the floor are well grounded.
The equipment room is dust-proof.
The humidity and temperature are at a proper level, respectively.
Wear an ESD-preventive wrist strap and uniform when touching a
circuit board.
Place the removed memory module, CF card, or HIM/MIM on an
antistatic workbench, with the face upward, or put it into an
antistatic bag.
Touch only the edges, instead of electronic components when
observing or moving a removed memory module, CF card, or
HIM/MIM.
3
particles/m