HP A6616 Installation Manual page 146

password simple 123456
authorization-attribute level 3
The FTP service is enabled after the authentication and authorization of the FTP server are

configured. The FTP server supports multi-client access. A remote FTP client sends a request
to the FTP server. The FTP server executes an action accordingly and returns the execution
result to the client.
After you configure the FTP server authentication and authorization, you need to set the user

level to 3. Otherwise, when you restore the backed-up file to the router, the system will prompt
that "You have no rights to store files". For configurations of user levels, refer to AAA
Configuration in the Security Volume of HP SR6600 Routers User Manual.
Step3 Enable the FTP client program on the PC.
In the following example, the FTP client program is the built-in Windows XP FTP client:
Enter ftp in the DOS window:
C:\Documents and Settings\Administrator>ftp
ftp>
ftp> open 192.168.80.10
Connected to 192.168.80.10.
220 FTP service ready.
User (192.168.80.10:(none)): guest
331 Password required for guest
Password:
230 User logged in.
Table 6-12 Description on the display information of enabling FTP server
C:\Documents and Settings\Administrator>ftp
ftp> open 192.168.80.10
User (192.168.80.10:(none))
331 Password required for guest
230 User logged in
Step4 Update an application file.
Using FTP, you can upload an application file from the client to the server (router), and
overwrite the original main application file to implement application updating. The updated
application file takes effect when the router reboots.
# Upload file main_bac.bin from the PC to the router, and saves it as main.bin.
ftp> binary
200 Type set to I.
ftp> lcd d:\update
Local directory now D:\update.
ftp> put main.bin main.bin
200 Port command okay.
150 Opening BINARY mode data connection for /main.bin.
Display information
Display information
Configure the user password.
Set the user level to 3.
Description
Enable the FTP client program on the PC.
In FTP client view, log into the IPv4 FTP server.
Input the username configured on the FTP server.
Input the password.
You have logged into the FTP server successfully.
Description