HP A6616 Installation Manual page 169

Failed to write data into storage device, maybe no enough space on device
Symptom 2: The file to be downloaded is not found. The following information

appears:
File will be transferred in binary mode
Downloading file from remote TFTP server, please wait...
File not found.
Symptom 3: The configuration of the network port is incorrect. The following

information appears:
Can't connect to the remote host
Solution
For symptom 1: Delete some files in the CF card or use a new CF card so that

enough space is available for the application program.
For symptom 2: Type the correct file name.

For Symptom 3: Configure the network port correctly. Make sure the network port is

up and you can ping through the TFTP server through the network port.
The barcode stuck on the router chassis contains information about production and servicing.
Before you return a faulty router for servicing, please provide the barcode information of the
router to your local sales agent.
Troubleshooting FTP Upgrading
Symptom
During router application upgrade through FTP, the following problems are encountered:
Symptom 1: The CF card has no enough space. The following information appears:

227 Entering Passive Mode (192,168,1,10,10,204)
150 "xxx" file ready to send (xxx bytes) in ASCII mode
FTP: Error Writing Local File(Screen).
Symptom 2: The file to be downloaded is not found. The following information

appears:
227 Entering Passive Mode (192,168,1,10,10,203)
550 Error: File xxx does not exist
FTP: Error Writing Local File(Screen).
Symptom 3: The configuration of the network port is incorrect. The following

information appears:
FTP: Unrecognized host or wrong IP address!
Solution
For symptom 1: Delete some files in the CF card or use a new CF card so that

enough space is available for the application program.
For symptom 2: Type the correct file name.

For symptom 3: Configure the network port correctly. Make sure the network port is

up and you can ping through the FTP server through the network port.
The barcode stuck on the router chassis contains information about production and servicing.
Before you return a faulty router for servicing, please provide the barcode information of the
router to your local sales agent.