Removing A Blank Panel - HP A6616 Installation Manual

Figure 4-48 Blank panel for a HIM/MIM slot
(1) Front view
(3) Oblique rear view
Figure 4-49 Blank panel for a power module slot
(1) Front view
(3) Oblique rear view

Removing a Blank Panel

Removing a Blank Panel
Follow these steps to remove a blank panel: Follow these steps to remove a blank panel:
Step1 Face the front panel of the router. Face the front panel of the router.
Step2 Locate the blank panel to be removed. Loosen the two captive screws counterclockwise with a Locate the blank panel to be removed. Loosen the two captive screws counterclockwise with a Locate the blank panel to be removed. Loosen the two captive screws counterclockwise with a
Philips screwdriver. Then, remove the blank panel. Philips screwdriver. Then, remove the blank panel.
Step3 The following figure illustrates how to remove a FIP blank panel. The following figure illustrates how to remove a FIP blank panel.
Blank panel for a HIM/MIM slot
Blank panel for a power module slot
(2) Side view
(4) EMI gasket
(2) Side view
(4) EMI gasket