HP A6616 Installation Manual page 142

At the CLI. In this approach, the ro At the CLI. In this approach, the router can serve as the FTP server or the FTP client.

Updating an Application Using FTP on the BootWare Menu Updating an Application Using FTP on the BootWare Menu
Step1 Set up an FTP updating environment. Set up an FTP updating environment.
Figure 6-10 Set up an FTP updating environment
The router serves as the FTP client, and the PC serves as the FTP server. The router serves as the FTP client,

Connect the management Ethernet interface on the router to the PC using a crossover Ethernet Connect the management Ethernet interface on the router to the PC using a crossover Ethernet Connect the management Ethernet interface on the router to the PC using a crossover Ethernet

cable. Ensure the connectivity between the router and the PC. In this example, the IP address cable. Ensure the connectivity between the router and the PC. In this example, the IP address cable. Ensure the connectivity between the router and the PC. In this example, the IP address
of the management Ethernet interface is 192.168.80.10, and that of the PC is 192.168.80.200.
Enable FTP server on the PC and set the path where the application file is stored. Enable FTP server on the PC and set the path where the application file is stored. Enable FTP server on the PC and set the path where the application file is stored.

Set the FTP username and password. Set the FTP username and password.

The FTP Server is not installed on the router by default. You need to purchase and install it

yourself.
You can update the applications of the router through the console port or the management You can update the applications of the router through the console port or the management You can update the applications of the router through the console port or the management

Ethernet interface.
For step 2 through step 4, refer to the correspondin For step 2 through step 4, refer to the corresponding steps in
TFTP on the BootWare TFTP on the BootWare Menu
Updating and Backing Up an Application Using FTP at the CLI Updating and Backing Up an Application Using FTP at the CLI Updating and Backing Up an Application Using FTP at the CLI
Router serving as the FTP client and PC serving as the FTP server Router serving as the FTP client and PC serving as the FTP server Router serving as the FTP client and PC serving as the FTP server
Step1 Set up the updating environment. Refer to Set up the updating environment. Refer to "
BootWare Menu" on page 6-21.
Step2 Use the dir command on the console terminal to view the files contained in the current file
system, and the available space of the storage device. For details, refer to step 2 in system, and the available space of the storage device. For details, refer to step 2 in " system, and the available space of the storage device. For details, refer to step 2 in "
and Backing Up an Application Using TFTP at the CLI
uter can serve as the FTP server or the FTP client.
Set up an FTP updating environment
ernet interface is 192.168.80.10, and that of the PC is 192.168.80.200. ernet interface is 192.168.80.10, and that of the PC is 192.168.80.200.
installed on the router by default. You need to purchase and install it installed on the router by default. You need to purchase and install it
Menu" on page 6-16.
21.
command on the console terminal to view the files contained in the current file command on the console terminal to view the files contained in the current file
plication Using TFTP at the
"Updating an App Updating an Application Using
"Updating an Application Using Updating an Application Using FTP on the
CLI" on page 6-19.
"Updating