HP A6616 Installation Manual page 82

Figure 4-24 Insert a FIP
Step4 Fasten the captive screws on the FIP clockwise with a Philips screwdriver. Fasten the captive screws on the FIP clockwise with a Philips screwdriver.
Figure 4-25 Fasten the captive screws
Step5 Turn on the power switch of the router if the router is powered off. Turn on the power switch of the router if the router is powered off.
Step6 After the FIP is powered on, the RUN LED (green) flashes once and then flashes fast (at 8 Hz). After the FIP is powered on, the RUN LED (green) flashes once and then flashes fast (at 8 Hz). After the FIP is powered on, the RUN LED (green) flashes once and then flashes fast (at 8 Hz).
It flashes slowly (at 1 Hz) after the application is loaded. This means that the FIP runs normally. It flashes slowly (at 1 Hz) after the application is loaded. This means that the FIP runs normally. It flashes slowly (at 1 Hz) after the application is loaded. This means that the FIP runs normally.
Insert a FIP
Fasten the captive screws