HP A6616 Installation Manual page 32

(5) Combo interface 0
"OPEN BOOK" sign – Refer to related sections when performing the following operations:
Operation
Plug/unplug a FIP-210
Plug/unplug an interface module
Connect an Ethernet cable
Plug/unplug an optical fiber
Technical specifications
Table 1-26 Technical specifications for the FIP-210
Item
Processor
Processor cores
Flash
Memory type and size
NVRAM
Combo interfaces
HIMs
MIMs
Dimensions (H × W × D)
Hardware encryption
Power consumption
Hot-swapping
"Installing and Removing a FIP" in Chapter 4 "Installing the Router"
"Installing and Removing a HIM" and "Installing and Removing a
MIM" in Chapter 4 "Installing the Router"
"Connecting the Management Ethernet Interface" and "Connecting
Ethernet Cables" in Chapter 4 "Installing the Router"
"Connecting an optical Ethernet interface" in Chapter 4 "Installing
the Router"
MIPS 1 GHz
8
4 MB
DDR2 SDRAM
2 GB (default, two 1 GB memory modules)
2 GB (maximum)
128 KB
2
2 electrical interfaces
(automatic MDI/MDI-X)
2 optical interfaces
2
2
45 × 399 × 412 mm (1.77 × 15.71 × 16.22 in.)
Supported
125 W
Supported
Reference
Specifications
10 Mbps, half/full-duplex
100 Mbps, half/full-duplex
1000 Mbps, full-duplex
1000 Mbps, full-duplex