Table of Contents
Advertisement
MI 3152(H) EurotestXC (2,5 kV)
Ends the Auto Sequence® and goes to Auto Sequence® result screen.
Refer to chapter 8.2.3 Auto Sequence® result screen for more
information.
Exits the loop of single tests and proceeds to the next step in the test
sequence.
The offered options in the control panel depend on the selected single test, its result and the
programmed test flow.
8.2.3 Auto Sequence® result screen
After the Auto Sequence® is finished the Auto Sequence® result screen is displayed.
At the left side of the display the single tests and their statuses in the Auto Sequence® are
shown.
In the middle of the display the header of the Auto Sequence® with Short code and description
of the Auto Sequence® is displayed. At the top the overall Auto sequence result status is
displayed. Refer to chapter 5.1.1 Measurement statuses for more information.
Options
Starts a new Auto Sequence®.
View results of individual measurements.
The instrument goes to menu for viewing details of the Auto Sequence®.
Saves the Auto Sequence® results.
A new Auto Sequence® was selected and started from a Structure object in the
structure tree:
The Auto Sequence® will be saved under the selected Structure object.
A new Auto Sequence® was started from the Auto Sequence® main menu:
Saving under the last selected Structure object will be offered by default. The
Figure 8.8: Auto Sequence® result screen
168
Auto Sequences
Advertisement
Table of Contents
