Operation Of Commanders - METREL EurotestXC MI 3152 Instruction Manual

MI 3152(H) EurotestXC (2,5 kV)
Figure B.2: Front side Plug commander (A 1314)
1 TEST
2 LED
3 LED
4 LEDs
5 Function selector
6 MEM
7 BL
8 Lamp key
9 Battery cells
10 Battery cover
11 Cap
B.4 Operation of commanders
Both LED yellow
Right LED red
Right LED green
Left LED blinks blue
Left LED orange
Both LEDs blink red
Both LEDs red and switch off
Figure B.3: Back side
Starts measurements.
TEST
Acts also as the PE touching electrode.
Left status RGB LED
Right status RGB LED
Lamp LEDs (Tip commander)
Selects test function.
Store / recall / clear tests in memory of instrument.
Switches On / Off backlight on instrument
Switches On / Off lamp (Tip commander)
Size AAA, alkaline / rechargeable Ni-MH
Battery compartment cover
Removable CAT IV cap (Tip commander)
Warning! Dangerous voltage on the commander's PE
terminal!
Fail indication
Pass indication
Commander is monitoring the input voltage
Voltage between any test terminals is higher than 50 V
Low battery
Battery voltage too low for operation of commander
198
Appendix B – Commanders