Display Organization; Measurement Result Window - METREL TeraOhmXA 10 kV Instruction Manual

MI 3210 TeraOhm XA 10kV

3.4 Display organization

Figure 3.6: Typical function display and graph screen

1 Measurement result window

2 Measurement control window
3 Messages window
4 Battery, time and communication indication
5 Measurement result line
6 Graphical presentation of measured data
3.4.1 Measurement result window
Measurement window shows all relevant data during measurement campaign.
Measured Insulation
resistance
Bar graph
U
Figure 3.7: Measurement window
Is shown in the center of a screen with the largest font. During
measurement campaign this result is refreshed every few
seconds. When the measurement is completed result is hold on
screen, until new measurement is started.
Graphically represents measured insulation resistance in respect
to the measurement range. It also displays limit value if it is
enabled.
Shows the output voltage. During measurement campaign this
result is refreshed every few seconds. When the measurement is
completed result is hold on screen, until new measurement is
started.
16
Instrument description