METREL EurotestXC MI 3152 Instruction Manual page 142

MI 3152(H) EurotestXC (2,5 kV)
Measurement procedure

Enter the ISFL function.

Set test parameters / limits.

Connect test cable to the instrument.

Connect test leads to the object under test, see Figure 7.72 and Figure 7.73.

Start the measurement.

Save results (optional).
Figure 7.74: Examples of First fault leakage current measurement result
Measurement results / sub-results
Isc1
First fault leakage current at single fault between L1/PE
Isc2 First fault leakage current at single fault between L2/PE
141
Tests and measurements