METREL EurotestXC MI 3152 Instruction Manual page 56

MI 3152(H) EurotestXC (2,5 kV)
Saves a measurement.
Saving of measurement on a position after the selected (empty or finished)
measurement.
Clones the measurement.
The selected measurement can be copied as an empty measurement under the
same Structure object. Refer to chapter 5.1.5.7 Clone a measurement for more
information.
Copies & Paste a measurement.
The selected measurement can be copied and pasted as an empty measurement to
any location in structure tree. Multiple "Paste" is allowed. Refer to chapter 5.1.5.10
Copy & Paste a measurement for more information.
Adds a new measurement.
The instrument goes to the Menu for adding measurements. Refer to chapter 5.1.5.5
Add a new measurement for more information.
Views and edit comments.
The instrument displays comment attached to the selected measurement or opens
keypad for entering a new comment.
Deletes a measurement.
Selected Measurement can be deleted. User is asked for confirmation before the
deleting. Refer to chapter 5.1.5.12 Delete a measurement for more information.
5.1.5.2 Operations on Structure objects
The structure object must be selected first.
Figure 5.5: A structure object is selected in the Tree menu
Options
Starts a new measurement.
Type of measurement (Single test or Auto Sequence®) should be selected first. After
proper type is selected, the instrument goes to Single Test or Auto Sequence®
selection screen. Refer to chapters 6.1 Selection modes and 8.1 Selection of Auto
Sequences®.
Saves a measurement.
Saving of measurement under the selected Structure object.
55
Memory Organizer