Redundancy Tab - Honeywell C300 User Manual

Plain Text
SIM Command
Simulation State
WIN32 Process
Identifier
Battery State Values
The following table provides information on the values that appear in the Battery State
field based on the battery backup and Disable Battery Alarm and Soft Fails field in the
Main tab.
Battery Backup
Yes
Yes
No
No

Redundancy tab

The Redundancy Tab displays redundancy-related information and allows redundancy
commands to be issued when the C300 FB is opened on the Monitor Tree in Control
Builder. The following table summarizes the parameter data you can monitor and/or
R500
April 2017
Parameter Name
SIMCOMMAND
SIMSTATE
PROCESS_ID
Disable Battery Alarm and Soft Fails field
Unchecked
(Reports battery-related alarms and soft
failures)
Checked
(Does not report battery-related soft failures.
However, an unknown battery error is
reported)
Unchecked
(Reports battery-related alarms and soft
failures)
Checked
(Does not report battery-related alarms and
soft failures)
Series 8 C300 Controller User's Guide
Honeywell
5. C300 Configuration Form Reference
5.1. C300 Controller Block
User
Configurable
No Initiates Simulation
Command from Shadow
Plant.
No Specifies the current state
of the simulation.
No Identifies associated
process.
OK
UNKNOWN
UNDERVOLTAGE
OK
Notes
Battery State
91