Fte Tab - Honeywell C300 User Manual

Plain Text
FTE Interface B MAC
Address
Redun. Interface
MAC Address
Note 1: IMAGEVER is also provided on the Main Tab; it is provided here with other version
information related to the C300.

FTE tab

The FTE tab contains statistics related to Fault Tolerant Ethernet (FTE) communications
and performance. The FTE tab features parameters associated with the MAC Address
Resolution Table (MART), which deals with on-line Media Access Control (MAC)
address mapping. Two separate MARTs are maintained - one for FTE nodes and one for
non-FTE nodes.
The following table summarizes the parameter data you can monitor on the FTE tab of
the configuration form for the selected C300 block.
Plain Text
FTE Mart Statistics
Address Count
Max Depth
Average Depth
Address Collisions
R500
April 2017
Parameter Name
MACADDRB
MACADDRR
Parameter Name
FTEMARTADDRCOUN
T
FTEMARTMAXDEPTH
FTEMARTAVGDEPTH
FTEMARTCOLLCOUN
T
Series 8 C300 Controller User's Guide
Honeywell
5. C300 Configuration Form Reference
User
Configurable
No Identifies Ethernet MAC
Address of FTE Interface
B (Green Tree Port)
No Identifies Ethernet MAC
Address of Redundancy
Interface.
User
Configurable
No Shows number of IP
addresses contained in
FTE MART.
No Shows maximum depth
that the FTE MART has
reached (largest number
of entries in table).
No Shows average depth of
FTE MART (average
number of entries in table).
No Shows number of
collisions that have
occurred when hashing
the FTE MART.
5.1. C300 Controller Block
Notes
Notes
101