Utp/Tcp Tab - Honeywell C300 User Manual

5. C300 Configuration Form Reference
5.1. C300 Controller Block
Plain Text
Crossover Cable
Failed

UTP/TCP tab

The UDP/TCP tab displays statistics related to open UDP and TCP connections
associated with this C300 Controller. These parameters provided here are used for
maintenance and performance monitoring purposes. The following table summarizes the
parameter data you can monitor on the UDP/TCP tab of the configuration form for the
selected C300 block.
Plain Text
UDP/TCP
Local UDP Listeners
(not used in this
release)
Current TCP
Connections
(not used in this
release)
UDP Statistics -
(Provides unreliable connectionless packet delivery service between clients.)
Datagrams Delivered
Datagrams for
Unknown Ports
104
Parameter Name
XOVERFAILED
Parameter Name
UDPLISTENERS
TCPCONNTABLE
UDPINDGRAMS
UDPNOPORTS
Series 8 C300 Controller User's Guide
Honeywell
User
Configurable
No Status indicator for
Crossover cable -
indicates that the top-level
FTE switch crossover
cable (Inter-LAN link) has
failed.
User
Configurable
No Shows path information for
all open ports on the FTE
Bridge module.
No Shows path information for
all currently connected
clients of the FTE Bridge
module.
No Total number of User
Datagram Protocol (UDP)
datagrams delivered to
destination protocol ports.
No Total number of received
UDP datagrams for which
there was no application at
the destination port.
Notes
Notes
R500
April 2017