Honeywell C300 User Manual page 126

5. C300 Configuration Form Reference
5.3. CEEC300 Function Block
Plain Text
Control Execution
Environment(CEE)
State
User Lock for CEE
Run
User Lock for CEE
Idle
Program Access may
command CEE from
Idle to Run
Program Access may
command CEE Run
to Idle
Alarm Info
In-Alarm Flag
Alarming Enabled
Enable Memory Limit
Exceeded Alarm
Powerup/Restart Settings
CEE State
120
Parameter Name
CEESTATE
USERLCKTORUN
USERLCKTOIDLE
PROGLCKTORUN
PROGLCKTOIDLE
INALM
ALMENBSTATE
ENBMEMALMFL
RRRCEESTATE
Series 8 C300 Controller User's Guide
Honeywell
User
Configurable
No The current state of
CEE.
Yes Indicates the user level
required to perform a
ColdStart and
WarmStart.
Yes Indicates the user level
required to command
CEEIDLE.
Yes Determines whether
program access is
allowed to command
CEE from Idle to Run.
Yes Determines whether
program access is
allowed to command
CEE from Run to Idle.
No Indicates if an alarm
has been detected with
this function block.
Yes Allows user to set the
alarm reporting function
used when an alarm
condition is detected by
the function block.
Yes Allows user to enable
the alarm reporting
function for Memory
Limit Exceeded alarm.
Yes Shows the CEE state
after a RAM retention
restart.
Notes
R500
April 2017