Iolink Block; Main Tab - Honeywell C300 User Manual

5.4

IOLINK Block

The IOLINK function block is created when a new C300 Controller block is added to the
Project tree in Control Builder. The following sections identify and describe all user-
visible parameters associated on the IOLINK configuration form. For more details about
these parameters refer to the Control Builder Parameter Reference.

Main Tab

The Main tab contains configuration and status information for the IOLINK block. Refer
to the To configure IOLINK Function Blocks
The following table summarizes the parameter data you can monitor and/or configure on
the Main tab of the configuration form for the selected IOLINK block.
Plain Text
Main
Tag Name
Item Name
Description
I/O Family
I/O Link Command
R500
April 2017
Parameter Name
Tag Name
Item Name
DESC
IOLINKKTYPE
COMMAND
Series 8 C300 Controller User's Guide
Honeywell
5. C300 Configuration Form Reference
for the steps to configure a IOLINK block.
User
Configurable
Project Only
System assigned or
user configured unique
name. Consisting of up
to 16 characters and at
least one character
must be a letter (A-Z).
Project Only
A non-unique name by
which an entity is known
within the
context of the enterprise
model.
Yes User-entered
descriptive text for the
function block.
Yes Allows selection of
Series 8 IO type to be
supported by this
IOLink.
Yes Allows users to initiate
selected commands for
the associated I/O link
5.4. IOLINK Block
Notes
139