Honeywell C300 User Manual page 196

7. C300 Controller Operation
7.4. Control Builder block icon descriptions
Icon
(blue & shadow)
(green)
(green,
simulation)
(green & white)
(green & white,
pause)
(green & yellow)
(green &
shadow)
(white & green)
(white & green,
pause)
(yellow & yellow)
(shadow &
yellow)
190
Represents . . .
Primary C300 is not synchronized and partner
C300 is absent or incompatible.
C300 is non-redundant.
C300 is non-redundant. Simulation mode
enabled.
Primary C300 is synchronized.
Primary C300, standby synchronization.
Primary C300 is not synchronized and partner
C300 is visible.
Primary C300 is not synchronized and partner
C300 is absent or incompatible.
Secondary C300 is synchronized.
Secondary C300, standby synchronization.
Secondary C300 is not synchronized and
partner C300 is visible partner present.
Secondary C300 is not synchronized and
partner C300 is absent or incompatible
Series 8 C300 Controller User's Guide
Honeywell
C300 Controller
(C300STATE)
Idle Soft Fail
Run Soft Fail or OK
Soft Fail
Run Soft Fail or OK
Soft Fail
Run Soft Fail or OK
Soft Fail
Run Soft Fail or OK
Soft Fail
Run Soft Fail or OK
Soft Fail
Run Soft Fail or OK
Soft Fail
Backup Soft Fail
Backup Soft Fail
Backup Soft Fail
Backup Soft Fail
R500
April 2017