7. C300 Controller Operation
7.5. Activate C300 Controller's CEE
Step
The CEE turns green on the Monitoring Tree.
Alternate methods:
Setting the CEE inactive
To set the CEE inactive, perform the following steps.
Step
1
From the Monitoring Tree, right-click CEE.
Click Change State...
2
190
Remember that the CEE must be active for anything assigned to the CEE
to work. Even if a CM is active, it will not do anything unless the CEE is
also active.
Click the Toggle State toolbar button
Select Operate > Change State...
Series 8 C300 Controller User's Guide
Honeywell
Action
to set the selected item active.
Action
R500
April 2017