Display Communications Tab - Honeywell C300 User Manual

5. C300 Configuration Form Reference
5.3. CEEC300 Function Block
Plain Text
Exchange
Connection Status
Exchange
Connection Error
Code
Exchange
Connection Error
Description

Display Communications tab

The Display Communications tab contains information about display connections to the
C300 (that is, Control Builder, Station, and so on). The following table summarizes the
parameter data you can monitor on the Display Communications tab of the
configuration form for the selected CEEC300 block.
Plain Text
Responder Connections
Average Get Rate
Maximum Get Rate
Average Store Rate
134
Parameter Name
EICONNSTS
EICONNERRCODE
EICONNERRINFO
Parameter Name
CDISPAVGPPSCONN [
]
CDISPMAXPPSCONN [
]
CDISPAVGSPSCONN [
]
Series 8 C300 Controller User's Guide
Honeywell
User
Configurable
No The status of the
connection between the
initiating controller and
the target controller or
programmable logic
controller (PLC).
No Shows the error code of
the connection between
the controller and the
target controller or PLC.
No Shows the extended
error information of the
connection between the
controller and the target
controller or PLC.
User
Configurable
No Shows the average
number of display peer
parameters/sec
processed by the CEE.
No Shows the maximum
number of display peer
parameters/sec
processed by the CEE.
No Shows the average
number of display
acyclic stores/sec
processed by the CEE.
Notes
Notes
R500
April 2017