Expansion Base With Dual Io Link Redundancy - Honeywell ML200 Series Installation And Commissioning Manual

Chapter 1 - Masterlogic components
Figure 4: Expansion base of ML200R (without dual I/O link redundancy)
The following table provides the expansion base details of ML200R, without dual I/O link redundancy.
Table 16: Expansion base details of ML200R
Index Part
1 Base attached guide
hole
2 Power module
connector
3 Expansion driver
module connector
4 Module built-in
connector
5 FG terminal

Expansion base with dual IO link redundancy

The expansion base of ML200R consists of the power module, expansion driver module, I/O module,
special module, and the communication module. (Ethernet module is not allowed in the expansion
base).
The following table provides details about the expansion base and expansion driver module for
ML200R (with dual IO link redundancy).
Table 17: Expansion base and expansion driver module for ML200R
PLC Types Part Number
ML200R 2MLR-E12H
2MLR-DBDF
2MLR-DBDT
2MLR-DBDH
Function
For attaching the main base to the panel in the control
panel.
For installation of power supply module.
For installation of expansion driver module.
For installation of I/O, special and communication
modules other than Ethernet module.
The ground terminal connected to the shielded pattern
of the PCB board.
Description
Expansion redundancy Base 12 slot
Expansion redundancy Driver module FO
Expansion redundancy Driver module TP
Expansion redundancy Driver module TP/FO
- 13 -