you set without saving them.
6. Click Save to save the settings.
9.4 Configuring Picture Overlay
Purpose:
Picture overlay enables you to overlay a picture on the image. This function enables a certain
enterprise or users to overlay their logo on the image.
Steps:
1. Enter the Picture Overlay Settings interface, Configuration > Image > Picture
Overlay.
2. Click Browse to select a picture.
3. Click Upload to upload it.
4. Check Enable Picture Overlay checkbox to enable the function.
5. Set X Coordinate and Y Coordinate values adjust the picture position on the image.
Adjust Picture Width and Picture Height to the desired size.
6. Click Save to save settings.
Note:
The picture must be in RGB24 bmp format and the maximum picture size is
128*128.
Network Camera User Manual
Figure 9-8 Picture Overlay
97