Hyundai NextGen User Manual page 131

Network Camera User Manual
Figure 10-28 Configure the Rule
Filter type: Pixels and Actual Size are selectable. If Pixels is selected, draw the
area of maximum size and minimum size on the live video for each rule. If Actual
Size is selected, input the length and width of the maximum size and minimum
size. Only the target whose size is between the minimum value and maximum
value will trigger the alarm.
Note: Make sure the camera calibration is configured if actual size is selected.
Detection Target: Select Human or Vehicle as the detection target. You can also
select All to detect all the objects as the target.
Draw line / area: For line crossing detection, you have to draw a line, and select the
crossing direction, which is bidirectional, A-to-B, or B-to-A. For
other events such as intrusion, region entrance, region exiting, etc., you have
131