Hyundai NextGen User Manual page 136

1. Check the checkbox of Rule to enable rules of face capture.
2. Click the rectangle sign
the drawn pupil will be displayed on the box below the live view. The minimize
pupil distance refers to the minimum square size composed by the area between
two pupils, and it is the basic standard for a camera to identify a target.
3. Click the hexagons sign to draw the detection area you want the face capture to
take effect. Draw area by left click end-points in the live view window, and
right click to finish the area drawing.
Notes:
Polygon area (4~10 sides) sides is supported.
If the live view is stopped, there is no way to draw the configured area.
4. Click Save to save the settings.
Advanced Configuration
Face Capture Version: It lists the version of the algorithms library. Configure
the following parameters according to your actual environment.
Detection Parameters:
Generation Speed [1~5]: The speed to identify a target. The higher the value, the
Network Camera User Manual
to draw the minimum pupil distance. The distance of
Figure 10-31 Face Capture
136