Handling Exception; Configuring Other Alarm - Hyundai NextGen User Manual

5. You can copy the settings to other alarm outputs.
6. Click Save to save the settings.

10.1.5 Handling Exception

The exception type can be HDD full, HDD error, network disconnected, IP address
conflicted and illegal login to the cameras.
Steps:
1. Enter the Exception Settings interface: Configuration > Event > Basic Event >
Exception.
2. Check the checkbox to set the actions taken for the Exception alarm. Refer to
Task 3: Set the Linkage Method for Motion Detection in Section 10.1.1.
3. Click Save to save the settings.

10.1.6 Configuring Other Alarm

Some certain cameras support Wireless Alarm, PIR (passive infrared sensor)
Note:
Alarm or Emergency Alarm.
 Wireless Alarm
Purpose:
When wireless alarm signal is sent to the camera from the detector, such as the wireless
door contact, the wireless alarm is triggered and a series of response actions can be taken.
Steps:
Network Camera User Manual
Figure 10-10 Exception Settings
109