Configuring Scene Change Detection - Hyundai NextGen User Manual

Figure 10-17 Configuring Defocus Detection
2. Check the checkbox of Enable to enable the function.
3. Click-and-drag the slider to set the detection sensitivity. The sensitivity value ranges
from 1 to 100, and the higher the value is, the more easily the defocus image can trigger
the alarm.
4. Select the linkage methods for defocus, including Notify Surveillance Center, Send
Email and Trigger Alarm Output.
5. Click Save to save the settings.

10.2.3 Configuring Scene Change Detection

Purpose:
Scene change detection function detects the change of surveillance environment affected
by the external factors, such as the intentional rotation of the camera. Some certain
actions can be taken when the alarm is triggered.
Note: Scene change detection function varies according to different camera models.
Steps:
1. Enter the Scene Change Detection settings interface, Configuration > Event > Smart
Event > Scene Change Detection.
Network Camera User Manual
115