Https Settings - Hyundai NextGen User Manual

2) If Manual is selected as the dial mode, you can also manually connect / disconnect
the wireless network.
5. 5.Set the white list. The mobile phone number on the white list can receive the alarm
message from the device and reboot the device via SMS.
1) Check the checkbox of Enable SMS Alarm.
2) Select the item on the white list, and click the Edit button.
3) Input the mobile phone number for the white list, check the checkbox of Reboot
via SMS, select the alarm for SMS push, and click OK.
Note: To reboot the device via SMS, send the message "reboot" to the device, and
the device will reply a message "reboot success" after rebooting succeeded.
iv.(Optional) You can click Send Test SMS to send a message to the mobile phone
for test.
4) v.Click Save to save the settings.
7.2.6

HTTPS Settings

Purpose:
HTTPS provides authentication of the web site and its associated web server, which protects
against Man-in-the-middle attacks. Perform the following steps to set the port number of
https.
E.g., If you set the port number as 443 and the IP address is 192.168.1.64, you may access
the device by inputting https://192.168.1.64:443 via the web browser.
Steps:
1. Enter the HTTPS settings interface. Configuration > Network > Advanced Settings
> HTTPS.
2. Check the checkbox of Enable to enable the function.
Network Camera User Manual
76