Hyundai NextGen User Manual page 155

2. View the memory card status on Status Detection tab.
Remaining Lifespan: It shows the percentage of the remaining lifespan. The lifespan of
a memory card may be influenced by factors such as its capacity and the bitrate. You
need to change the memory card if the remaining lifespan is not enough.
Health Status: It shows the condition of your memory card. There are thrree status
descriptions, good, bad, and damaged. You will receive a notification if the health status
is anything other than good when the Arming Schedule and Linkage Method are set.
Note: It is recommended that you change the memory card when the health status is not
"good".
3. Click R/W Lock tab to add a lock to the memory card.
With the R/W lock added, the memory card can only be read and write when it is
unlocked.
Add a Lock
(1) Select the Lock Switch as ON.
(2) Input the password.
(3) Click Save to save the settings.
Unlock
(1) If you use the memory card on the camera that locks it, unlocking will be done
automatically and no unlocking procedures are required on the part of users.
(2) If you use the memory card (with a lock) on a different camera, you can go to
Network Camera User Manual
Figure 11-11 R/W Lock Setting
155