Hyundai NextGen User Manual page 102

save the settings.
4. Move the mouse to the end of each day, a copy dialogue box pops up, and you can
copy the current settings to other days.
5. Click Save to save the settings.
Note: The time of each period can't be overlapped. Up to 8 periods can be configured for
each day.
Task 3: Set the Linkage Method for Motion Detection
Check the checkbox to select the linkage method. Audible Warning, Send Email, Notify
Surveillance Center, Upload to FTP/Memory Card/NAS, Trigger Channel and Trigger Alarm
Output are selectable. You can specify the linkage method when an event occurs.
The linkage methods vary according to the different camera models.
Note:
 Audible Warning
Trigger the audible warning locally. And it only supported by the device that have
the audio output.
 Notify Surveillance Center
Send an exception or alarm signal to remote management software when an event
occurs.
 Send Email
Send an email with alarm information to a user or users when an event occurs.
Note: To send the Email when an event occurs, please refer to Section 7.2.3 to
Network Camera User Manual
Figure 10-4 Linkage Method
102