Hyundai NextGen User Manual page 74

Table of Contents

Advertisement

Email Encryption: None, SSL, and TLS are selectable. When you select SSL or TLS
and disable STARTTLS, e-mails will be sent after encrypted by SSL or TLS. The
SMTP port should be set as 465 for this encryption method. When you select SSL or
TLS and enable STARTTLS, emails will be sent after encrypted by STARTTLS, and
the SMTP port should be set as 25.
Note:
If you want to use STARTTLS, make sure that the protocol is supported by your
e-mail server. If you check the Enable STARTTLS checkbox when the protocol is not
supported by your e-mail sever, your e-mail will not be encrypted. Attached Image:
Check the checkbox of Attached Image if you want to send emails with attached alarm
images.
Interval: The interval refers to the time between two actions of sending attached
pictures.
Authentication (optional): If your email server requires authentication, check this
checkbox to use authentication to log in to this server and input the login user name
and password.
For your privacy and to better protect your system against security risks, we
strongly recommend the use of strong passwords for all functions and network
devices. The password should be something of your own choosing (using a
minimum of 8 characters, including at least three of the following categories:
upper case letters, lower case letters, numbers and special characters) in order
to increase the security of your product.
Proper configuration of all passwords and other security settings is the
responsibility of the installer and/or end-user.
The Receiver table: Select the receiver to which the email is sent. Up to 3
receivers can be configured.
Receiver: The name of the user to be notified.
Receiver's Address: The email address of user to be notified.
Network Camera User Manual
73

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents