Configuring Rs485 Settings - Hyundai NextGen User Manual

Steps:
1. Enter RS232 Port Setting interface: Configuration> System > System Settings >
RS232.
2. Configure the Baud Rate, Data Bit, Stop Bit, Parity, Flow Control, and Usage.
Note: If you want to connect the camera by the RS232 port, the parameters of the RS232
should be exactly the same with the parameters you configured here.
3. Click Save to save the settings.
6.2.4

Configuring RS485 Settings

Purpose:
The RS485 serial port is used to control the PTZ of the camera. The configuring of the
PTZ parameters should be done before you control the PTZ unit.
Steps:
1. Enter RS-485 Port Setting interface: Configuration > System > System Settings >
RS485.
Network Camera User Manual
Figure 6-7 RS232 Settings
46