Hyundai NextGen User Manual page 42

HTTP: Allows the same quality as of TCP without setting specific ports for
streaming under some network environments.
MULTICAST: It's recommended to select MCAST type when using the
Multicast function. For detailed information about Multicast, refer to Section
7.1.1 Configuring TCP/IP Settings.
Play Performance: Set the play performance to Shortest Delay or Auto.
Rules: It refers to the rules on your local browser, select enable or disable to
display or not display the colored marks when the motion detection, face detection,
or intrusion detection is triggered. E.g., enabled as the rules are, and the face
detection is enabled as well, when a face is detected, it will be marked with a green
rectangle on the live view.
Image Format: Choose the image format for picture capture.
Record File Settings: Set the saving path of the recorded video files. Valid for the

record files you recorded with the web browser.
Record File Size: Select the packed size of the manually recorded and downloaded
video files to 256M, 512M or 1G. After the selection, the maximum record file size is
the value you selected.
Save record files to: Set the saving path for the manually recorded video files.
Save downloaded files to: Set the saving path for the downloaded video files in
playback mode.
Picture and Clip Settings: Set the saving paths of the captured pictures and clipped

video files. Valid for the pictures you capture with the web browser.
Save snapshots in live view to: Set the saving path of the manually captured
pictures in live view mode.
Save snapshots when playback to: Set the saving path of the captured pictures in
playback mode.
Save clips to: Set the saving path of the clipped video files in playback mode.
Note: You can click Browse to change the directory for saving the clips and
pictures, and click Open to open the set folder of clips and picture saving.
3. Click Save to save the settings.
Network Camera User Manual
41