Table of Contents
Advertisement
3.
Check the checkbox of Enable Dynamic Analysis for Motion if you want to mark the
detected objects with green rectangles.
Note:
Select Disable for rules if you don't want the detected objected displayed with the
green rectangles. Select disable rules from Configuration > Local Configuration >
Live View Parameters-rules.
4.
Click Draw Area. Click and drag the mouse on the live video to draw a motion
detection area. Click Stop Drawing to finish drawing one area.
5.
(Optional) Click Clear All to clear all of the areas.
6.
(Optional) Move the slider to set the sensitivity of the detection.
Network Camera User Manual
Figure 10-1 Enable Motion Detection
100
Hide quick links:
Advertisement
Table of Contents
