Hyundai NextGen User Manual page 92

Network Camera User Manual
Figure 9-3 Day/Night Switch
Day: the camera stays at day mode.
Night: the camera stays at night mode.
Auto: the camera switches between the day mode and the night mode according to the
illumination automatically. The sensitivity ranges from 0 to 7, the higher the value is,
the easier the mode switches. The filtering time refers to the interval time between the
day/night switch. You can set it from 5s to 120s.
Scheduled-Switch: Set the start time and the end time to define the duration for
day/night mode.
Triggered by alarm input: The switch is triggered by alarm input. You can set the
triggered mode to day or night.
Smart Supplement Light: Set the supplement light as ON, and Auto and Manual are
selectable for light mode.
Select Auto, and the supplement light changes according to the actual luminance. E.g.,
if the current scene is bright enough, then the supplement light adjusts itself to lower
power; and if the scene is not bright enough, the light adjusts itself to higher power.
Select Manual, and you can adjust the supplement by adjusting the distance. E.g., if the
object is near the camera, the device adjusts the supplement light to lower power, and
the light is in higher power if the object is far away.
Backlight Settings

BLC Area: If you focus on an object against strong backlight, the object will be too dark
to be seen clearly. BLC compensates light to the object in the front to make it clear. OFF,
Up, Down, Left, Right, Center, Auto, and Custom are selectable.
91