Vca Configuration; Behavior Analysis - Hyundai NextGen User Manual

3. Select the Region from the drop-down list for detection settings.
4. Click Area Settings and click Draw Area button to start the area drawing.
5. Click on the live video to specify the four vertexes of the detection region, and right
click to complete drawing.
6. Set the time threshold and detection sensitivity for object removal detection.
Threshold: Range [5-20s], the threshold for the time of the objects removed from the
region. If you set the value as 10, alarm is triggered after the object disappears from the
region for 10s.
Sensitivity: Range [1-100]. The value of the sensitivity defines the similarity degree of
the background image. Usually, when the sensitivity is high, a very small object taken
from the region can trigger the alarm.
7. Repeat the above steps to configure other regions. Up to 4 regions can be set. You can
click the Clear button to clear all pre-defined regions.
8. Click Arming Schedule to set the arming schedule.
9. Click Linkage Method to select the linkage methods.
10. Click Save to save the settings.

10.3 VCA Configuration

10.3.1 Behavior Analysis

The behavior analysis detects a series of suspicious behavior, and certain linkage methods
will be enabled if the alarm is triggered.
Network Camera User Manual
127