Hyundai NextGen User Manual page 83

Network Camera User Manual
3. You can customize the following parameters for the selected stream type.
Video Type:
Select the stream type to video stream, or video & audio composite stream. The audio
signal will be recorded only when the Video Type is Video & Audio.
Resolution:
Select the resolution of the video output.
Bitrate Type:
Select the bitrate type to constant or variable.
Video Quality:
When bitrate type is selected as Variable, 6 levels of video quality are selectable.
Frame Rate:
Set the frame rate. The frame rate is to describe the frequency at which the video stream
is updated and it is measured by frames per second (fps). A higher frame rate is
advantageous when there is movement in the video stream, as it maintains image quality
throughout.
Max. Bitrate:
Set the max. bitrate from 32 to 16384 Kbps. The higher value corresponds to the higher
video quality, but the better bandwidth is required.
Note: The maximum limit of the max. bitrate value varies according to different camera
platforms. For certain cameras, the maximum limit is 8192 Kbps or 12288 Kbps.
Video Encoding:
If the Stream Type is set to main stream, H.264 and H.265 are selectable, and if the stream
type is set to sub stream or third stream, H.264, MJPEG, and H.265 are selectable. H.265
is a new encoding technology. Compared with H.264, it reduces the transmission bitrate
under the same resolution, frame rate and image quality.
Selectable video encoding types may vary according to different camera modes.
Note:
H.264+ and H.265+:
H.264+: If you set the main stream as the stream type, and H.264 as the video
•
82